Has the performance of your Netgear extender degraded? Want to enhance its security and overall performance? In that case, you need to update Netgear extender firmware. Updating the firmware upgrades the security patches of your extender. Thus, it improves the flow of information packets over the web.
If you are doing Netgear extender firmware update for the first time, you need to keep a few things in check. Furthermore, there are things you need to prepare before initiating the firmware update process. When you access the mywifiext.net setup wizard, everything follows through a perfect flow. Make sure you read till the very end to know the right method to update the Netgear extender firmware.
Steps to Perform Netgear Extender Firmware Update
Downloading Firmware File
Do you know the model of your Netgear extender? Well, you need to download the updated firmware file according to the model number. If you are not aware of the model number, using the product name also does the job.
You can download the file using any medium or device. Just make sure that it is available on your computer before starting the firmware update process.
Once you have the updated firmware file, start with preparing your computer. Connect it to a consistent power source. Furthermore, you should check out the power cables for any faults or cuts.
In case you come across any issue, replace or repair the cables. The connection must not be loose, otherwise, power fluctuations could damage the computer. That is going to halt your firmware update process.
An extender is the major component of the Netgear extender firmware update process. So, it needs to have the right connections. So, begin with connecting the extender to the router. However, before that, connect it to a power source. Just be conscious that the extender gets a constant supply.
Place it in a central location after connecting it to the router. Remove anything that disrupts the WiFi signals emitting from the WiFi extender.
Accessing Web Browser
The next step includes opening a web browser on your computer. Choose an updated web browser for the Netgear extender firmware update process. Otherwise, you might experience issues with an older web browser.
Be it Google Chrome or Mozilla Firefox, you must ensure that it is free of cache and cookies. This makes the process fast and issue-free.
Opening Default Web Address
Here comes the crucial step. Start with typing in mywifiext net web address in the web browser. However, instead of typing in the search bar, it should be entered in the address bar.
Moreover, make sure there are no errors while typing in the web address. Many people often use capitalized words in the web address. To avoid that, keep the Caps Lock keys off.
Accessing Netgear Genie Wizard
A login page appears before your eyes after entering the web address and pressing the Enter key. You need to enter your default login credentials in the login portal. After clicking on the Log In button, you enter Netgear Genie Wizard.
Note: In case the web address is not working, you can even use the 192.168.1.250 IP address. It must be typed in the address bar of the web browser.
Initiating Firmware Update
When you open the Netgear Genie setup wizard, browse the options to find the Firmware Update option. Click on it and select the Upload file option. Then, you need to browse the file that you downloaded in the beginning.
Locate the file on your computer and choose to upload it. Wait for the upload.
Finish the Update
Once the file is uploaded, wait for the installation. It could take a few minutes for installation. Make sure you do not turn off the extender or computer during the process.
Following the above-mentioned step, the Netgear extender firmware update process becomes easier. Hence, you enjoy faster internet connectivity and updated security. In short, everything works perfectly fine which enhances your overall internet experience.